Powerboat Accessories

Shop Online

Control Handle Control Handles (Billet Aluminum)
Anodized Black (Jet Drive Shifter when foot throttle is used)
#R457394 Standard $89.99
#R457754 3 Position “No Switch” $137.99
#R457759 3 Position “With neutral safety switch” $154.99
Foot Throttle

Foot Throttles Push Style (Fabricated)
#EFT 300P Stringer mount $209.99

Foot Throttle and Rest

Foot throttle & Foot Rest (Billet Aluminum)
Light weight, Mounts to stringer, “Great for center steer drag boats”
#ARS 6061 FT Foot Throttle $124.99
#ARS 6062 FR Foot Rest $84.99

Foot Pedal Blank

Foot Pedal Blanks (Fabricated)
#EFT 500PR Right hand $87.99
#EFT 501PL Left Hand $87.99

Foot Throttle

Foot Throttle (Cast Aluminum with Built in Return Spring)
#GLE 1283 Floor Mount $84.99
#GLE 258 Stringer Mount $119.99

Control Cable (Morse/Teleflex)

Control Cables (Morse/Teleflex)
Click here for Morse/Teleflex Selection Chart
Type 33C

Type 43BC

Type 43BC

Type 43C

Type 43C

Cable Bellows

Cable Bellows (Berkeley 12 JE/JF)
#ATM 4007 $16.50 each

Thru Hull Cable Fittings

Cable Accessories (Thru Hull Cable Fittings)

#ARS 1 Packing type cable seal specify for 33c or 43 series cable $14.99
#ARS 2 Reverse bucket cable connector with nyliners $39.99
#ARS 3 Stainless heim end 3/16”hole10-32 thread
            Or ¼” hole ¼-28 thread $14.99
#ARS 4 Quick release cable end for 43 series cable $21.99
#ARS 5 Quick release cable end for 33c series cable $21.99
#ARS 6 Steering clevis (swivel) $24.99
#ARS 7 Stainless Cable hook clamp 6 hole $7.99
#ARS 8 43Series (Reverse Cable) Seal $18.99

Steering Cable Thru Hull Tube Steering Cable Thru Hull Tube Assy.
#AG13020 Complete assembly $86.25
#AG2038 Thru hull tube only $34.00
#AG2039 Tube nuts $12.99 ea
#AG2040 Tube thru hull rubber $4.99
#AG2041 Tube end cap with grease zerk $26.99
Steering Set Back Install Kit

Splashwell Steering Set Back Install Kit
Steering set back install kit contains a transom bezel, steering tube, steering extension, clevis, & a cable packer.
All aluminum parts are made from billet aluminum and are anodized.
#AT K5001$159.99

Steering Extensions

Steering Extensions
A must when adding a droop snoot or bowl extension.
#ATR9207 10'' C/C extension $57.00
#ATR9107 6 1/2'' C/C extension $53.00
#ATR9601 4 1/8'' C/C extension $50.00

Thru Transom Water Dump

Fittings (Thru Transom "Aluminum" Water Dumps)
Can be used with -8AN fittings, PVC or rubber hose. Highly polished.
#R 390210 3” length $12.99

Battery Box

Battery Box (Heavy Duty Cast Aluminum)
Superb Quality & Priced Right. These Battery Boxes Measure 6 ¾” x 10 1/8”
They Include Stainless Studs,Nuts&Washers. They have a black porcelain-like Rex coating.
#R 241121 24 Series Battery Box Complete $64.99

Gas Fill Flip Top

Gas Fill (Flip Top)
This flip top gas fill is designed to be connected to the tank with 2” I.D. Hose.
The cap has a quick release spring and a leak proof filler.
#GLE 0677 Aluminum $27.99 each
#GLE 1296 Stainless $98.99 each

Gas Vent

Gas Vent
Provides venting for Gas tanks.
#GLE 405 Stainless Steel vent. $12.99

Speed Coat

Speed Coat
A dry solid film graphite lubricant, (Commonly used in jet pumps and on bottom of boats in order to create less friction = = More Speed!)
#ARS 200 12oz spray can $17.99

Life Seal Silcone Life Seal Silicone
A unique combination of marine silicone and polyurethane, Life Seal provides a durable permant watertight seal. Can be used above or below waterline. Used for sealing decks to hulls, thru_hull fittings, and transom adapters housings.
#MMDLI-1169 Clear 10.6 oz cartridge $17.99
#MMDLI-1170 White 10.6 oz cartridge $17.99
White Marine Tex Epoxy

Epoxy’s
White Marine Tex Epoxy, for quick and easy “Minor” hull repairs.
Sea Goin’ Poxy Putty “Great for setting Jet drive intake” in jet boats.
Will dry under water.
#R 167104 Marine Tex $25.99
#R 1350-K2 ¾ Pound Kit. Sea Goin’ $26.99

Bucket Seat

Custom Marine Upholstery
Anything for any Boat!
We build custom seat frames. Seat frames are constructed of Fiberglass & Wood. Then covered with a special UV Protected marine grade vinyl. Give us a call or Fax us with you’re Dimensions for a quote.

Seat Shell Only (Fiberglass)
Front bucket shells $149.99 ea
Rear bench shell
$249.99

Bench Seat

Steering Wheel

Steering Wheels
Three spoke dished steering wheel. Rim is double dipped foam. Spokes are bright chrome. The perfect wheel for competition or fun. An attractive addition to any boat.
Black Only.
#GLE 414 12” Diameter $69.99
#GLE 415 13” Diameter $69.99

Steering Wheel Hub Adapters and Cap

Steering Wheel (Hub Adapters and Cap Assembly)
#GLE 417-C Cap assembly $16.99
#GLE 418-A Adapter for Rideguide $19.99
#GLE 419-B Adapter for Teleflex $26.99
#GLE 420-E Adapter for Steermaster $21.99
#GLE 421-D Adapter for ¾ Standard Taper $19.99
#GLE 422-B Adapter for Attwood $26.99
#GLE 423-B Adapter for Morse $26.99

Engine Harness Engine Harness
Wiring your boat's engine can be simple and easy. Take the frustration out of bad connections. These weather proof correct fit Hardin Marine engine harness make them the perfect choice for a new boat or to update an old boat. Save time and money. $119.99
Jet Boat Harness Boat Harness Wired For Volt Meter
Wiring your boat doesn't have to be a hassle due to tangled wires, bad connections, and guess work. Bad wiring can literally ruin a boat. These Hardin Marine boat harnesses use 275 degree, thermal crossed linked wire that won't kink and is abrasive resistant. Don't take chances with your boat, trust the leader in marine wiring, Hardin Marine. 20 Ft. with Volt Meter. $249.99
Push Button Starter Switch Push Button Starter Switch
Waterproof and Dustproof with protective neoprene cap. Rated @ 35 amps at 12volts. $11.99
40 Amp Relay 40 AmpRelay With Harness
5 Pin relay. Universal applications, electric fuel pumps, etc. $13.99
Kill Switch

Kill Switches
Double ball kill switch. Can be made to either make or break circuit.
#R 301104 $21.99

Mercury Kill Switch

Mercury Kill Switch
Snap-off cap releases in full 360’ circle. Recognized by all major boat racing associations.
#R 368100 For Battery ignitions $45.99
#R 368101 For Magneto ignitions $45.99
#R 368102 Replacement Cap $9.99
#R 368103 Lanyard $9.99

Bearing Buddie Cover

Bearing Buddie Covers (Billet Aluminum)
“Stops grease from slinging out on to wheels” Fits 2 1/8 Dia. Bearing Buddie
#ARS 40001 $35.99 pair

LED Trailer Lights Trailer Lights (L.E.D.)
These 26 Diode LED lights are the perfect touch to any trailer. LED’s have no filament, therefore are not susceptible to shock or vibration. Units are completely water proof and come with all required hardware including light housing, grommet and weather pack connector.
#KM 60250R $78.99 pair
Automatic Bilge Drain

Automatic Bilge Drain
Automatically allows water to exit your boat while under way. Closes with water pressure when stopped. Plug measures 2" X 2". $19.75

Aluminum Adel Clamp Aluminum Adel Clamps
Aluminum Adel clamps make mounting fuel lines and wires easy!
1/4" 20pk $10.99
3/8" 20pk $11.99
1/2" 15pk $11.99
5/8" 12pk $10.99
3/4" 10pk $10.99
1" 6pk $6.99
Liquid Filled Gauge

Liquid Filled Gauge
Liquid Filled 2" Diameter Test Gauges. Stainless Steel Case. Bottom Mount. For use when checking Engine block pressure or checking Jet pump pressures.

2" Dia 1/4"Npt bottom mount
#MS-56469505 0-15 psi $21.85
#MS-56469513 0-30 psi $17.85
#MS-56469521 0-60 psi $17.85
2" Dia 1/4"Npt back mount
#MS-56469588 0-15 psi $22.85
#MS-56469596 0-30 psi $18.85
#MS-56469604 0-60 psi $18.85

Liquid Filled Gauge Liquid Filled 1-5/8” Gauge
Liquid Filled 1-5/8” diameter gauge. 1/8” centered N.P.T back mount. Machined, engine turned dial with black pointer. Glycerin filled for vibration protection. Choose from 0-15psi, 0-30psi, 0-60psi, and 0-100psi. $19.99
Reverse Cable Pin Reverse Cable Pin
Fits 33c or 43 series cables. Used on American Turbine diverters. $29.70
Cable Clamp 43c Cable Clamp
$8.95
Cable End Cable End
Fits 43 series cable $10.95
Diverter Wheel Control Diverter Wheel Control Button
Mount's to steering wheel for ultimate diverter control @ your finger tips! Includes diodes $61.99
Caviation Boss Caviation Boss
Male bosses for 3/8" turn buckles. Precision machined chrome plated brass. $14.50
Water Pressure Regulator Kit Water Pressure Regulator Kit
Designed to prevent blown head gaskets or leaking head gaskets particulary in JET boats. Allows you to add up to 20' degrees to your operating temperature. Maintains full water flow to engine, bypassing to a thru-transom fitting if pressure becomes excessive due to high RPM. Mount the pressure gauge on the block to monitor water pressure in motor. A good recommendation for pressure would be nothing over 15psi @ w.o.t. (hose not included). $145.78
Water Pressure Regulator Kit and Flush Pressure Regulator Kit + Flush
Designed to prevent blown head gaskets or leaking head gaskets particulary in JET boats. Allows you to add up to 20' degrees to your operating temperature. Maintains full water flow to engine, bypassing to a thru-transom fitting if pressure becomes excessive due to high RPM. Mount the pressure gauge on the block to monitor water pressure in motor. A good recommendation for pressure would be nothing over 15psi @ w.o.t. (hose not included). Also included is a Bulkhead garden hose flush fitting,a ball valve & a one way bypass valve. This is a nice complete kit for saltwater jet boats. $232.78
Engine Flush Fitting Engine Flush Fitting
Allows you to permanently mount a female hose adapter fitting anywhere! $36.99
Utility Pump Handy Boy Utility Pump
Versatile polished brass multi-purpose hand pump. Drain, fill or top up engine and gearbox oil Overcomes problem of hard to reach drain plugs and filler caps Oil and corrosion resistant brass neoprene construction with up to 1 1/2 gpm output 1001 other uses on any boat Fitting: Connection for 1/2" (13mm) ID hose Foot adapter for 1/2" (13mm) ID hose 2 each 1/2" (13mm) ID hoses 1 each 5/16" (6.5mm) probe, 1 each 1/4" (6mm) probe Size: 12" long x 1 1/4" diameter (31cm x 3cm) $68.99
Degreaser

Degreaser
An excellent cleaner/degreaser for dirty parts. Used to final clean pump parts prior to assembly, as it leaves NO residue! Caution! will attack some paints! Test on small area first. $12.99

Citri Clean Citri Clean
$9.99
Stringer Washer

Stringer Washers (Billet Aluminum)
Stringer washers are ¼” thick and Available in 1 3/8” diameter or 2 ½” diameter with a ¼” 5/16”or 3/8” Hole. (Available inBlack, Red, Blue & Gold anodized & machined finish)
#ARS Stringer Washers. “Specify Diameter, Hole size, and Finish when ordering” $1.56 each