Individual Parts

    Pump Shaft
    		 High Performance Jet Pump Shaft
    This is a 17-4 Jet pump shaft, Known to be the strongest in the industry. A must for any Weekend warrior or your all out Blown Alcohol Jet boat!
    #AG 2020 17-4 Shaft $474.99
    Shaft End Repair Sleeve Shaft End (Repair Sleeve)
    No need to replace the entire shaft because of damage due to Sand or lack of maintenance, this repair sleeve allows you to Repair the end of the shaft. “Requires Machining”
    #AG 31309 $64.99
    Shaft Sleeve Slinger Ring Shaft Sleeve (Slinger Ring)
    Available for: American turbine, Berkeley & Dominator. Must specify make of pump and serial # when ordering
    #AKS 111 $35.78
      Pump Shaft Packing
    		Pump Shaft (Packing)
    DPS packing seal cartridge unit
    Increase Shaft H.P. & Eliminate cavitations caused by a loose packing
    #DPS 1353 $98.95
     
    Standard Rope seal packing (Woven graphite)
    # ARS 8287$28.95
    Thrust Bearing Thrust Bearing
    This is a Double Row 8 balls per row 16 total. Good for use on moderate applications up to 500 H.P
    $58.75
    Thrust Bearing Extreme Duty Thrust Bearing
    This is an Extreme duty, 11 ball double row angular contact bearing. Used in High Horsepower applications where severe axial thrust loads are present. "Filling slot faces motor" "Care must be taken when installing bearing onto shaft,Only press on inner race of bearing"
    $109.64
    Bronze Shouldered Wear Ring Bronze Shouldered (Wear rings)
    Create a double seal with these shouldered wear rings
    Available for: American turbine, Berkeley & Dominator.
    Over sizes available to fit you’re used impeller
    Must specify Impeller wear ring surface Length & Diameter
    Make of Pump and Serial # when ordering.
    #AKS WR5000 $159.99
    Plastic Insulator Plastic (Insulator)
    Designed to effectively hold the wear ring in place.
    #AT WR6004 $5.00
    Impeller Shim Impeller (Shims)
    Impeller shim Kit
    #AG 130XX $10.00
    Impeller Nut Impeller (Nut)
    Billet Machined
    #AG 2035 $21.78
    Impeller Key Impeller (Key)
    1/4” Stainless steel Key
    #AG 2031 $3.50
    Seals for Bearing Cap, Suction Housing, and Bowl

    Seals (Bearing Cap)
    Driveshaft or bearing cap seal
    #ARS 31237 $17.00

    Seals (Suction Housing)
    Slinger ring seal “Specify make of pump & serial #”
    #AKS 31252 $14.00

    Seals (Bowl)
    Bowl seal
    #ARS 31239 $10.00

    Pin Bushing (Nyliner)
    Pin Bushings (Nyliners)
    Pin sizes 3/8” or 1/2”
    #ARS 31240 3/8” $3.95ea
    #ARS 31234 1/2” $3.95ea

    Gasket Sealant
    4 oz. Gasket Sealing Compound $6.95
    Gaskets
    Gaskets
    #ARS 31285 Intake / Suction $11.00
    #ARS 31247 Bearing cap 4 hole $3.50
    #ARS 31248 Bearing cap 8 hole $4.25
    #ARS 31235 Bowl 8 Hole $5.50
    #ARS 31236 Bowl 16 Hole (Double Drilled) $6.50
    #ARS 31265 Nozzle Housing 8 hole $4.00
    #ARS 31266 Nozzle Housing 16 hole (Double Drilled) $5.00
    #ARS 31242 Transom Housing Rubber $20.00
     


      Click To Go To Homepage


    SITEMAP I TERMS AND CONDITIONSI CONTACT US

    Copyright© 2008 ARS MARINE INC - all rights reserved