Popoffs & Ratchets

Roy Miersch Popoff

The Miersch popoff is designed to relieve pressure in the suction housing, If there is excessive build up of pressure due to hard de-acceleration or engine failure. Set your desired pressure on the CO2 regulator to keep popoff valve closed, if unit senses greater pressure than the regulator set point or a pressure spike it opens automatically. Making it safer to set your boat down on the top end there is an override button. The unit bolts in place of the hand hole cover.

Requires machining of suction housing bore.

Labor rate for machining housing $100.00

Miersch Popoff $2,150.00

Miersch Safety Restraint Bag $95.00

Hi Tech Ratchet Jet pump Release

Ratchet release with neutral. Now you can run you’re boat on the trailer without the hassles of pulling the drive shaft. Also allows the pump impeller to still turn if engine failure occurs reducing the risks of blowing the tail or taking a hard jackknife turn.

For the ultimate in strength and reliability, Suction housing requires drilling and tapping of additional bolt holes.

Labor rate $50.00

Hi Tech Ratchet $1,500.00

SITEMAP I TERMS AND CONDITIONSI CONTACT US